AVL & Tracking System X6
The purpose of manufacturing such a device is to control and manage the deriver's transport. The unit is empowered with a SIM card which makes it possible to send and receive information. Also, it can show your car on the screen via internet connection. The unit provides us with rich amount of information about the speed of the car, its position, and the traveled distance. This technology enables one to have complete control over a wide range of vehicles. The warning features which make the unit different include: Warning function for logging in some specific areas, warning at times of crash, robbery, and troubles, and warning when entering limited signal zones for cellphones and GPS
-Data communication through the following protocols: SMS/USSD/GPRS/TCP/UDP
-Network information security: AES-128 Data Encryption
-The encryption system built in the unit is Megaforce AES-128 which is the only encryption way in the world that cannot be hacked into.
-Recognizing Jamming GPS & GSM and reporting to the center or storing them in internal memory.
-Function: When observing such warning, we can realize that the reason of not receiving data is the traffic jam or damage to the unit by someone.
-Defining alarm based on velocity changes to X,Y,Z directions and sending them to the center or storing in the internal memory with sensitivity of +/g16
-Firmware-update via GPRS network and FTP server or serial port
Megaforce is the only company that connects to the main server without any agents and holds the top rank in terms of security. It should be pointed out that Megaforce Co. is able to provide a very secure and separate server for some companies and organizations that sense this need, then the organization can separately track their own vehicles.
2-way voice communication and wire-tap
-Tracking and logging settings based on time intervals, place intervals, situation changes, velocity changes, and changes in the angle of the movement of the vehicle
-Defining Geofence (geographical boundaries around the car) by the user in circular, rectangular, polygonal forms.
-Measuring the GPS signal and reporting its status
-Recognizing jamming related to GOS or GSM and reporting it to the service center
-Recognizing and reporting GPS antenna failure or short circuit
-Determining the car speed via GPS and hardware sensor
-Controlling and reporting speed, velocity, and towing situation
-Defining more than 100 types of alarms by user and network
-Tracking via GPRS or SMS
-Web-based central system
-Controlling via SMS
-Connection with the car's theft-alarm and sending alarms to the service center in case of robbery
-Sending alarm to the service center in case of car's towing
-Sending alarm to the service center in case of over speeding
-GPS alarm in case of antenna disconnection
-Equipped with storage battery and the ability to continue in times of power cuts
-Alarm in case of power cuts
-Observing and controlling the exits in the service center
-4 inputs (3digital and 1 analogue)
Inputs can be used to determine and alarm in the following ways:
-Switching on/off the vehicle
-Theft-alarm system operates
Outputs are used in the following ways:
-Car's door lock
-Blowing the horn
-Switching on/of the lights
-Determining the amount and conditions of sending the information about the vehicle
-Storing alarm and location information in the unit
-This information can be stored in the unit when GPS is off and sent to the service center when there is a reconnection